(E2) Gunslinger .38 Laser Training Cartridges – Set of 3

Description

GREAT DRY-FIRE TRAINING!!!  (Set of 3)

CFDA now has our own brand of Laser Training Cartridges. This is a highly efficient low-cost laser cartridge. While this unit gives a continuous laser beam, only the initial pulse will record a time on the Gunslinger Timer. Allowing to let the shooter know that they would indeed hit a real target.

Note: The Laser Light will remain on continuously until the pressure of the firing pin is released from the primer/switch. “Colt-style” actions, must be re-cycled to an empty chamber, whereas Ruger, New Uberti, or other actions (wherein releasing the trigger removes the firing pin from the primer-switch). Always make sure the firing pin pressure is released, so that you will not wear out batteries.

We highly recommend a Set of 3 especially for Colt-Style Actions!!!  It’s best to install 3 laser cartridges in every other chamber of a six-gun!  Why?  That way, every time you fire a laser-shot you simply cycle the action one-time, to release the firing pin from the primer-switch, before re-holstering and you’re ready for your next draw!  It becomes second-nature after one practice session.  It’s far superior than having to cycle a full cylinder rotation that a single laser would require for each, and it also saves the cost of purchasing a set of 6 for a Ruger, Uberti, or other style actions. 

Comes with 3 – LR626 Batteries & Instructions. After unscrewing the cap, the 3 batteries need to be installed flat-side down into the chamber.  Please check that your cap stays screwed finger tight into the body of the laser.  If they are allowed to loosen they will increase the length of the cartridge that can cause drag on the frame as the cylinder turns.